If you are using Windows 10 operating system và receiving "WiFi doesn"t have a valid IP configuration" error, apply solutions listed below

WiFi doesn’t have a valid IP configuration means Your NIC (Network interface card) unable to lớn get a valid IP address from the DHCP vps to communicate with the router and Internet access. As a result, you might unable lớn access network shared folders or printers and unable khổng lồ connect to lớn the mạng internet as well. The problem might due lớn incorrect network configuration, faulty network drivers or problematic NIC, or Temporary gitch with network devices. Here we have listed different solutions help fix wifi doesn’t have a valid IP configuration windows 10.

Bạn đang xem: 11 Solutions For The "Wi Fi Doesn'T Have A Valid Ip Configuration" Error

Contents1 No valid IP configuration Windows 101.1 check DHCP client service is Running1.2 Reset Network Adapter & TCP/IP1.3 Reconfigure Networking connection setting1.4 Assign IP Address Manually1.5 Reinstall your Network Adapter Driver

No valid IP configuration Windows 10

Whenever you face internet connection problems, the first thing you must try to lớn restart network devices includes your PC. That fixes if any temporary glitch was causing the problem.Temporarily disable third-party Antivirus và disconnect VPN (if installed), Disconnect and reconnect khổng lồ the Wi-Fi network.
Also, perform Windows Clean boot that fixes the problem if any third-party ứng dụng service conflict was causing No internet access.

Check DHCP client service is Running

If DHCP client service is not running your NIC (Network Interface Card) unable to lớn get a valid IP address from the DHCP server. Kiểm tra and make sure the DHCP service is running to Assign or get a valid IP address khổng lồ your computer.Press Windows + R, type services.msc and okScroll down và locate DHCP clients service, check its runningIf it’s running, Right-click và select Restart.If not started Right click and select start.Also, make sure its set lớn automatic startup.You can vì chưng this by right click -> properties -> change the startup type lớn automatic.Restart the windows lớn take effect the changes, kiểm tra problem solved.

Reset Network Adapter & TCP/IP

Launch Command Prompt as an Administrator. To vì this, you need type in “cmd” in the search bar (to the right of the start menu). Now, right-click on Command Prompt và select to run it as Administrator. Now type in the following commands và press enter key each:
netsh Winsock reset – This will reset the network adapter
Press Windows + R, type Regedit, and ok to mở cửa the windows registry editor.Backup registry database then, navigate to lớn the following key.HKEY_LOCAL_MACHINESYSTEMControlSet001ControlNsieb004a00-9b1a-11d4-9123-0050047759bc26Here Now right-click on 26 key & select Permissions option.When you click on permission, this will xuất hiện a new window.Select Everyone from the usernames list, and check enable “Allow” checkbox given for “Full Control” permission.Click on apply và ok to make save changes.

Xem thêm: Hướng Dẫn Chơi Town Of Salem Việt Hóa, Town Of Salem

Again type netsh int IP reset command to reset the TCP/IP protocol without any deny error. Next Type ipconfig /flushdns & press the enter key to lớn clear DNS cache.Restart Windows khổng lồ take effect the changes, Now kiểm tra internet connection connected Successfully.

Reconfigure Networking connection setting

Still having the problem, let’s reconfigure network connection settings. To do this again open Command Prompt as Administrator và run the following highlighted commands one by one:ipconfig /release – release the current IP addressipconfig /renew – renew the IP address/ Request DHCP for net IP addressipconfig /flushdns – flush the DNS cache on your Windows PCipconfig /registerdns – register the DNSRestart your computer and kiểm tra it should fix the issue. Still getting Issue Fallow next step.

Assign IP Address Manually

Here another effective solution that may fix the problem. DHCP fails lớn automatically assign a valid IP But you can showroom a valid IP address by your self lớn fix the problem.Press Windows + R, type ncpa.cpl & okHere on the Network connection window, Right click on the Wi-Fi adapter select propertiesDouble click on internet Protocol Version 4 (TCP/IPv4).Now Assign IP Address & gateway address.Also on Preferred DNS Type & on Alternet DNS Address type
Note: Gateway address is your Router IP address. & Ip address should be on your Router IP address range. For example: If your Router IP address is, then type the IP address 192.168.0.xx. Click tab key this will assign the subnet mask automatically. On gateway address, type your router IP address.That’s all Now click ok khổng lồ save changes And check your problem solved network connected.

Reinstall your Network Adapter Driver

And the ultimate solution, Update or reinstall the Wi-Fi adapter driver that fix most of the Network and Internet connection problems on windows 10, 8.1, and 7.Press Windows + R, type devmgmt.msc and ok.This will mở cửa the device manager, display all installed driver list.Click on Network Adapters to expand the entry.This will danh mục all the network adapters that were installed on your computer.From the expanded list, right-click on the Network Adapter for your computer và click on Uninstall.You will see a popup warning saying, “You are about lớn uninstall this device from your computer” click on ok lớn Uninstall.Restart your computer Windows should automatically reinstall the right Driver for the Network Adapter.Or you can tải về the latest available network adapter driver from the manufacturer website install it và check.
If All the above methods unable to lớn fix, then its time to lớn use the system restore feature. This will revert back your system khổng lồ the previous working state where Windows PC running smoothly.Did these solutions help lớn fix Wi-Fi connected, but no mạng internet access or Wi-Fi does t have a valid IP configuration on Windows 10, 8.1, and 7? Let us know on the comments below, Also readWhat is the Difference Between IPv4 và IPv6 Protocols?Windows 10 can’t detect Network Proxy Settings? Here five working solutions.How to lớn Install Printer Via IP Address In Windows 10, 8.1 & 7Windows 10 Scanner Not Working “Cannot communicate with the scanner.”